 |
New MSO/DPO3000 Series Digital Phosphor Oscilloscopes |
|
|
 |
|
Feature-Rich Tools for Debugging Mixed Signal Designs |
|
Feature-rich Tools for Debugging Mixed
Signal Designs
With the MSO/DPO3000 Mixed Signal Oscilloscope Series, you can
analyze up to 20 analog and digital signals with a single instrument to
quickly find and diagnose problems in complex designs. Bandwidths up
to 500 MHz and a minimum of 5x oversampling on all channels ensure
you have the performance you need for many of today’s mainstream
applications. To capture long windows of signal activity while maintaining
fine timing resolution, the MSO/DPO3000 offers a deep record length of
5 Mpoints standard on all channels.
With Wave Inspector® controls for rapid waveform navigation, automated
serial and parallel bus analysis, and automated power analysis - the
MSO/DPO3000 Oscilloscope Series from Tektronix provides the feature-rich
tools you need to simplify and speed debug of your complex design.
The MSO/DPO3000 Series offers a variety of analytical solutions including cursors, 29 automatic measurements, statistics
and waveform math. Despite a tiny footprint (only 5.4 in. deep) and light weight (9 lbs.), the MSO/DPO3000 Series
offers exceptional performance, a large 9 in. WVGA widescreen display and knob-per-channel vertical controls.
Features & Benefits:
Key Performance Specifications
- 100 MHz, 300 MHz, 500 MHz models
- 2 or 4 analog channels
- 16 digital channels (MSO Series)
- 5 Mpoint standard record length on all channels
- Up to 2.5 GS/s sample rate on all analog channels
- Up to 121.2 ps timing resolution on all digital channels with MagniVu™ high speed acquisition
- 29 automated measurements and FFT analysis
- Front panel USB host port for data storage
- Serial bus triggering and analysis options for I²C, SPI, CAN, LIN, RS-232/422/485/UART and I2S/LJ/RJ/TDM
- Parallel bus triggering and analysis, including multi-channel set-up and hold triggering (MSO Series)
- Power analysis option
- HDTV and custom video analysis option
Serial Bus Trigger and Decode
- I2C, SPI, CAN, LIN, RS232/422/485/UART serial triggering, decode and analysis options Ease of Use Features
- Wave Inspector® controls provide unprecedented efficiency in waveform analysis
- 9 in. (229 mm) WVGA widescreen color display
- USB 2.0 on front panel for quick and easy data storage
- USB 2.0 device port for direct PC control of oscilloscope using USBTMC
- Built-in ethernet port
- Plug-and-play connectivity and analysis software solutions
- e*Scope® remote viewing and control
- TekVPI® probe interface supports active, differential and current probes for automatic scaling and units
- Small footprint and light weight
- Only 5.4 in. (137mm) deep and 9 lbs. (4 kg)
Applications
- Embedded design and debug
- Investigation of transient phenomena
- Power measurements
- Video design and debug
- Spectral analysis
- Automotive electronics design and debug
- Manufacturing test and quality control
- Electro-mechanical design and analysis
- Bio-medical product development
- Industrial control
|
Fast waveform capture rate maximizes the probability of capturing elusive glitches and
other infrequent events.
|
Triggering on a specific data packet going across an I2C bus. The Yellow waveform is clock and the
blue waveform is data. A Bus waveform provides decoded packet content including Start, Address,
Read/Write, Data and Stop.
|
Packet decode table showing decoded Identifier, DLC, Data and CRC for every CAN packet in a long acquisition.
|
I2C decode showing results from a search for Address value 76. The white triangles indicate each instance of the Address value
76 in the record.
|
Wave Inspector Controls provide unprecedented efficiency in viewing, navigating and analyzing waveform data.
|
|
