|
General purpose, 2 channel Digital Storage Scopes with high quality TFT color LCD displays. The GDS-1000 series offers dual sampling mode. This enables users to select either Real-Time sampling (250MS/s)
or high-speed Equivalent Sampling (25GS/s rate). Along with Advanced trigger functions, light-weight bench style design and economical cost, these models are highly attractive as possible replacements for analog models.
Memory and Interface – capable of saving up to 17 waveforms into internal memory. 2 saved reference waveforms plus 2 live ones may be viewed simultaneously. SD card mass storage and USB device port are supported, providing
storage/transfer of measurement data and remote control for diversified solutions. For Educational Purposes – instructors not wanting to use Autoset function may disable it, so students can manually operate scope functions
Key Facts:
- 2 channels, full bandwidth from 25 to 100 MHz
- Dual sampling mode: 250 MSa/s Real-Time and 25GSa/s equivalent-Time Sampling Rate
- 4000 Points Memory Length Per Channel
- Large 5.6-in Ultra-bright TFT Color
Wide-angle viewable area, 8 X 12 Division display
- DC Battery Power Operation (optional)
- Up to 19 Automatic Measurements
- Video/Pulse Width Trigger
- FFT Analysis
- Up to 10ns Peak Detection
- USB Port for PC Connection
- 6-Digit Real-Time Frequency Counter
- Store waveform raw data (CSV files)
- Capture screen image as BMP files
Features:
Memory and Interface
Up to 17 waveforms on the screen could be saved into the
internal memory for later recall, and 2 saved reference
waveforms plus 2 live ones could be shown on the screen at
the same time for comparison. SD card mass storage and USB
device port are supported, providing storage/transfer of
measurement data and remote control for diversified solutions
Automatic measurement function
The Auto Measurement function shows the snapshot of all
voltage and time related readings of an input signal
simultaneously on the display
Easy to use
The 19 Auto Measurement functions, FFT
Measurement, Advanced Triggering,
Multi-Language Screen Menu and On-Line
Help manual are all standard features of the
GDS-1000 series.
Enhanced CAL signal output
GDS-1000 series has an enhanced 1kHz calibration signal.
Its output frequency is adjustable from 1 kHz to 100 kHz
as well as the duty cycle adjustable by 5%~95%.
Autoset Disable Function
For the educational purpose, instructors might not want to use
Autoset function on the DSO when they are teaching how to
use oscilloscope for the measurement. The GDS-1000 series
can disable the Autoset function, enabling students to
manually operate oscilloscope functions to further enrich their
learning experience.
|
